Sizing Guide
Sizing
Find your fit.
USAMODWATCH builds are assembled to order, and most bracelets can be adjusted to your wrist. Most bracelets fit roughly 5.7–8.7 in (145–220 mm); most cases measure 38–42 mm, and most use a 20 mm lug width. Use this guide to measure your wrist and see how each case size wears.
Measure your wrist in three steps
A soft tape measure and a minute are all you need.
-
Wrap the tape
Place a soft tape measure around your wrist just below the wrist bone. Keep it snug against the skin without pulling it tight. If you do not have a tape, wrap a strip of paper, mark the overlap and measure it against a ruler.
-
Note the circumference
Write the measurement down in millimeters or inches. This is your wrist size — the figure used to set a bracelet or choose a strap length.
-
Add room to breathe
Add about 0.4–0.6 in (10–15 mm) for a comfortable fit. A bracelet should rest on the wrist without pressing into the skin, and should still let the wrist bend freely.
Case size
Case size on the wrist
Case diameter is measured across the case, excluding the crown. These ranges describe how a watch tends to sit rather than a strict rule — wrist shape matters as much as circumference.
31–38 mm
Compact and easy to wear under a cuff. Our 31 mm Datejust builds sit mostly on top of the wrist, while 38 mm cases offer a classic, restrained profile.
39–41 mm
The core of the collection. A 39–41 mm case balances presence and comfort on most wrists between roughly 6 and 7.5 in (150–190 mm).
42–46 mm
A statement fit. Large chronographs and sports watches in this range suit bigger wrists, or anyone who prefers a watch that dominates the wrist.
Bracelets and straps
Metal bracelets
Oyster, Jubilee and President-style bracelets ship sized for an average wrist and can be shortened by removing links. A small screwdriver or spring-bar tool is enough. If the clasp has micro-adjustment positions, try those before removing a link.
Rubber, leather and canvas
Straps use a standard buckle or a cut-to-size rubber strap. Leather and canvas are adjusted through the buckle holes; rubber straps can be trimmed in small steps for a closer fit.
Changing a strap
Straps are held by spring bars, and a spring-bar tool makes the swap straightforward. Match the lug width of your case — 20 mm on most builds, up to 22–26 mm on some larger cases — and check the product page for the exact figure.
Video walkthroughs: adjusting an Oyster, Jubilee or President bracelet, fitting a rubber strap, adjusting other bracelets, and removing and installing a strap.
Still unsure? Contact our team with your wrist measurement and the design you are considering — we will confirm the fit before you order.
Sizing questions
Before you order
How do I know which bracelet length I need?
Each product page lists the adjustable wrist range — typically 5.7–8.7 in (145–220 mm). The 31 mm Datejust models are smaller, at about 5.35–7.09 in (136–180 mm). Measure your wrist as above and choose a watch whose range includes your measurement with a little room. If you sit at the edge of a range, contact us before ordering.
Can I shorten the bracelet myself?
Yes. Metal bracelets can be shortened by removing links, and the video guides above walk through the process. If you would rather not do it yourself, a local jeweler or watchmaker can size it in minutes.
What if the bracelet is too short?
Contact us before ordering. Some builds can be supplied with extra links or a longer strap, and we will confirm what is possible for the model you have chosen.
How do I choose a case size?
Start with the ranges above, then consider lug-to-lug height: a 40 mm case with short lugs often wears smaller than a 38 mm case with long lugs. Our product pages list both figures.
Will a strap from another watch fit?
Only if the lug width matches. Most of our cases use a 20 mm lug width; the 31 mm Datejust models use 17 mm, and some larger cases use 22, 24 or 26 mm. Check the specifications on the product page before ordering a separate strap.